Biological Activity of Essential Oils of Four Juniper Species and Their Potential as Biopesticides.

The objective of this study was to assess the biological activity of essential oils (EOs) of four Juniperus species obtained via two different distillation methods and their potential as biopesticides. The studied factors were juniper species (Juniperus communis L., J. oxycedrus L., J. pygmaea C. Koch., and J. sibirica Burgsd), plant sex (male (M) and female (F)), and distillation method (hydrodistillation via a standard Clevenger apparatus (ClevA) and semi-commercial (SCom) steam distillation). The hypothesis was that the EO will have differential antioxidant, antimicrobial, and insecticidal activities as a function of plant species, plant sex, and distillation method. The two distillation methods resulted in similar EO composition within a given species. However, there were differences in the EO content (yield) due to the sex of the plant, and also differences in the proportions of some EO components. The concentration of α-pinene, ß-caryophyllene, δ-cadinene and δ-cadinol was dissimilar between the EO of M and F plants within all four species. Additionally, M and F plants of J. pygmaea, and J. sibirica had significantly different concentrations of sabinene within the respective species. The EOs obtained via ClevA extraction showed higher antioxidant capacity within a species compared with those from SCom extraction. All of the tested EOs had significant repellent and insecticidal activity against the two aphid species Rhopalosiphum padi (bird cherry-oat aphid) and Sitobion avenae (English grain aphid) at concentrations of the EO in the solution of 1%, 2.5%, and 5%. The tested EOs demonstrated moderate activity against selected pathogens Fusarium spp., Botrytis cinerea, Colletotrichum spp., Rhizoctonia solani and Cylindrocarpon pauciseptatum. The results demonstrate that the standard ClevA would provide comparable EO content and composition in comparison with SCom steam distillation; however, even slight differences in the EO composition may translate into differential bioactivity.

A universal route to fabricate bacterial cellulose-based composite membranes for simultaneous removal of multiple pollutants.

A self-standing, robust bacterial cellulose (BC)-based multifunctional composite membrane embedded with desirable nano-adsorbents has been successfully fabricated via a facile versatile strategy. As expected, the developed BC-based composite membrane enables the simultaneous and efficient removal of multiple co-existing pollutants.

A Critical Review on Pulsed Electric Field: A Novel Technology for the Extraction of Phytoconstituents.

Different parts of a plant (seeds, fruits, flower, leaves, stem, and roots) contain numerous biologically active compounds called "phytoconstituents" that consist of phenolics, minerals, amino acids, and vitamins. The conventional techniques applied to extract these phytoconstituents have several drawbacks including poor performance, low yields, more solvent use, long processing time, and thermally degrading by-products. In contrast, modern and advanced extraction nonthermal technologies such as pulsed electric field (PEF) assist in easier and efficient identification, characterization, and analysis of bioactive ingredients. Other advantages of PEF include cost-efficacy, less time, and solvent consumption with improved yields. This review covers the applications of PEF to obtain bioactive components, essential oils, proteins, pectin, and other important materials from various parts of the plant. Numerous studies compiled in the current evaluation concluded PEF as the best solution to extract phytoconstituents used in the food and pharmaceutical industries. PEF-assisted extraction leads to a higher yield, utilizes less solvents and energy, and it saves a lot of time compared to traditional extraction methods. PEF extraction design should be safe and efficient enough to prevent the degradation of phytoconstituents and oils.

Facile Fabrication of a Functional Filter Tip for Highly Efficient Reduction of Nicotine Content in Mainstream Smoke.

The nicotine addiction problem is of great concern, particularly in adolescents. Notably, nicotine addiction drives humans to continue smoking. Notably, several diseases and disorders are caused by smoking. To date, various adsorbents have been proposed to develop a functionalization filter tip for reducing nicotine content in mainstream smoke. However, the nicotine adsorption efficiencies of most of the reported functionalization filter tips were not satisfactory, and their preparation process was complex and time-consuming. Herein, we demonstrate a highly active and adsorbing filter tip for cigarettes, fabricated by decorating polydopamine (PDA) on the surface of a commercial filter tip in situ. The PDA coating on the filter tip was obtained by the self-polymerization of dopamine (DA) within 16 h, which was quicker and easier than the preparation processes of other reported functionalized filter tips. Significantly, the PDA-decorated filter tip had a nicotine adsorption efficiency as high as ∼95%, which was much higher than most of the commercial filter tips.

A review on chitosan-based membranes for sustainable CO2 separation applications: Mechanism, issues, and the way forward.

Effective carbon dioxide (CO2) separation by nominal energy utilization is the factual attempt in the present era of energy scarcity and environmental calamity. In this perspective, the membrane- based gas separation technology is a budding endeavour owing to its cost -effectiveness, ease of operational maintenance and compact modular design. Among various membrane materials, bio-based polymers are of interest as they are abundant and can be obtained from renewable resources, and can also reduce our dependency on exhaustible fossil fuel-based sources. In this review, the structure-property relationship of chitosan and some of its film-forming derivatives has been critically studied for the first time in view of the fundamental properties required for gas separation applications. Various factors affecting the gas permeation performance of chitosan-based membranes have been highlighted along with prospects and propositions for the design of a few novel bio-based membranes based on the exhaustive analyses.

Use of water and ethanol extracts from wine grape seed pomace to prepare an antioxidant toothpaste.

BACKGROUND: Extracts of fresh wine grape seeds/skin or of grape pomace seeds were used to prepare antioxidant natural toothpastes. RESULTS: Ethanol extracted twice more polyphenols than water; ultrasound did not provide any improvement in the extraction. The addition of freeze-dried ethanol extracts of seeds or skin, at 2% and 10%, to the commercial toothpaste significantly increased the polyphenol content, both from white grape seeds and skin and from red grape seed pomace. The evaluation of time stability (shelf life) revealed a decrease, after 4 months, of 3.9% and 9.4% in total polyphenol content, in 5% and 10% water extracts, but not for ethanol extracts. 1,1-Diphenyl-2-picrilhydrazil1 antiradical activity was the highest in 10% of seed water extract toothpaste and, after 4 months, the activity was stable. CONCLUSION: Ethanol and water are efficient and safe solvents to create natural toothpaste with grape or pomace seed extract with antioxidant activity. © 2021 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Comparative assessment of three RNA extraction methods for obtaining high-quality RNA from Candida viswanathii biomass.

Isolating high quality RNA is a limiting factor in molecular analysis, since it is the base for transcriptional studies. The RNA extraction method can directly affect the RNA quality and quantity, as well as, its overall cost. The industrial importance of the yeast genus Candida in several sectors comes from their capacity to produce Lipases. These enzymes are one of the main metabolites produced by some Candida species, and it has been shown that Candida yeast can biodegrade petroleum hydrocarbons and diesel oil from biosurfactants that they can produce, a feature that turns these organisms into potential combatants for bioremediation techniques. Thus, this study aimed to determine an efficient method for isolating high quality RNA from Candida viswanathii biomass. To achieve this aim, three different RNA extraction methods, TRIzol, Hot Acid Phenol, and CTAB (Cetyltrimethylammonium Bromide), were tested. The three tested methods allowed the isolation of high-quality RNA from C. viswanathii biomass and yielded suitable RNA quantity for carrying out RT-qPCR studies. In addition, all methods displayed high sensitivity for the expression analysis of the CvGPH1 gene through RT-qPCR, with TRIzol and CTAB showing the best results and the CTAB method displaying the best cost-benefit ratio (US$0.35/sample).

Direct separation and purification of α-lactalbumin from cow milk whey by aqueous two-phase flotation of thermo-sensitive polymer/phosphate.

BACKGROUND: α-lactalbumin (α-La) is of great interest to the industry as a result of its excellent functional properties and nutritional value. Aqueous two-phase flotation (ATPF) of thermo-sensitive polymer poly (ethylene glycol-ran-propylene glycol) monobutyl ether (UCON) and KH2 PO4 was applied to directly separate and purify α-La from milk whey, which was purposed to simplify the production process and reduced cost of production. RESULTS: The effect of ATPF composition and operating parameters on the flotation efficiency (E) and purity of α-La were investigated. The optimal conditions included 2 min of premixing time, 30 mL min-1 flow velocity and 20 min of flotation time, whereas the composition conditions comprised 35.0 mL 0.18 g mL-1 phosphate solution (containing 10% (cow milk whey/salt solution, v/v) cow milk whey, 50 ppm defoamer and 2 g NaCl) and 5.0 mL of 40% (w/w) UCON solution. Under the optimal conditions, E of α-La was 95.67 ± 1.04% and purity of α-La was 98.78 ± 1.19%. UCON was recovered by a thermally-induced phase separation and reused in next ATPF process without reducing E of α-La. Purified α-La was characterized by several key technologies. The results indicated that α-La in cow milk whey could be directly separated and purified by the ATPF and the purity was satisfactory. Moreover, it was suggested there was no obvious structure difference between the α-La separated by ATPF and the α-La standard. CONCLUSION: The present study enabled the recycling of UCON, providing an effective, economically viable and environmentally friendly approach for the separation and purification of protein. © 2021 Society of Chemical Industry.

Advances in the Extraction, Purification and Detection of the Natural Product 1-Deoxynojirimycin.

1-Deoxynojirimycin (1-DNJ), a polyhydroxylated alkaloid, is a highly selective and potent glycosidase inhibitor that has garnered great interest as a tool to study cellular recognition and as a potential therapeutic agent. The development of analytical methods for the quantification polyhydroxylated alkaloids in natural products requires a multifaceted approach. Many publications over the past five decades have described analytical methods for this compound. However, recently more advanced techniques have come to prominence for sample extraction, purification, detection, and identification. This review provides an updated, extensive overview of the available methods for the extraction, purification, identification or detection of 1-DNJ. The review highlights different strategies for the design of 1-DNJ detection methods, which we analyzed in light of recent detection data. Finally, we conclude with perspectives on possible strategies for increasing the efficiency of identification and quantification of 1-DNJ in the future.

Optimization of antioxidant, anti-diabetic, and anti-inflammatory activities and ganoderic acid content of differentially dried Ganoderma lucidum using response surface methodology.

The dried Ganoderma lucidum (GL) has been widely used for its pharmacological properties and bioactive ganoderic acids (GAs). Herein, extraction procedures combining ultra-sonication and heating were optimized using response surface methodology based on four variables (antioxidant activity, anti-diabetic activity, total GAs content, and total polysaccharide content) and principal component analysis. The extraction of freeze-dried GL at temperatures between 64.2 and 70 °C for 1.2 h maximized the antioxidant activity and GA content, whereas the polysaccharide content and anti-diabetic activity were maximized by extraction between 66.8 and 70 °C for more than 2.8 h. Heat-dried GL extracted at 50 °C for 3 h provided the greatest anti-inflammatory activity against HaCaT cells by suppressing the response to inflammation related cytokines at mRNA levels. These results suggest that extraction conditions might be a limiting factor for target-oriented investigations, and optimized extraction methods may improve the potential effect and quality of harvested GL products.

Volatile organic compounds of tobacco leaves versus waste (scrap, dust, and midrib): extraction and optimization.

BACKGROUND: Volatile organic compounds are present at very low concentration but exhibit an important influence on flavor and aroma of tobacco leaves and products. During tobacco processing, at different stages, tobacco wastes occur. Since they are delivered directly from the tobacco plant, they are expected to have a similar aroma profile. RESULTS: The volatile composition of three types of tobacco waste (scrap, dust, and midrib) was characterized for the first time and compared with tobacco leaves' volatile composition. Ultrasound-assisted extraction with hexane followed by gas chromatography-mass spectrometry was successfully applied. Different ultrasound-assisted extraction parameters (temperature, time, and solvent:solid ratio) showed a significant influence on the volatile profiles of the extracts obtained. The most important compounds in tobacco leaves, scrap, and dust with the highest abundance were nicotine (up to 87.5%), 4,8,13-duvatriene-1,3-diol (up to 16.2%), and neophytadiene (up to 9.4%). In midrib, only nicotine was present in all extracts. The most abundant compounds in the extracts were quantified and subjected to optimization using response surface methodology. CONCLUSION: Regression analysis showed that 83-98% of the variation was explained by the models obtained. The experimentally obtained values agreed with those predicted, thus indicating the suitability of the model employed and the success of response surface methodology in optimizing the extraction conditions. © 2020 Society of Chemical Industry.

Development of an aqueous ultrasound-assisted extraction process of bioactive compounds from beet leaves: a proposal for reducing losses and increasing biomass utilization.

BACKGROUND: Red beet plants are cultivated worldwide for the consumption of their roots, generating large amounts of unexploited by-products. In particular, beet leaves (BLs) represent about 50% of the whole plant and are usually discarded as waste. This constitutes not only an economic issue, since multiple resources invested in the production will be wasted, but also an environmental problem because of the pollution associated with their disposal. However, BLs comprise an important source of functional compounds (polyphenols and betalains) that could be recovered from the raw material, representing a sustainable solution for the underutilization of this by-product. This study proposes the recovery of polyphenols and betalains using an aqueous ultrasound-assisted extraction (UAE) process at different powers (35, 50, and 100 W) that was characterized and optimized. RESULTS: UAE significantly enhanced the recovery of bioactive compounds and shortened the time required for extraction in comparison with traditional macerations (35 < 50 < 100 W). During UAE, the temperature of the systems increased as a function of the power applied, favouring the recovery of these phytochemicals. Additionally, a Box-Behnken design and response surface methodology were employed to optimize UAE conditions (90 W ultrasound power, 1:20 solid:liquid ratio, 16 min extraction time), under which the yields were 14.9 mg g-1 (polyphenols), 949.1 µg g-1 (betaxanthins), and 562.2 µg g-1 (betacyanins), consistent with the values predicted by the models. CONCLUSION: This study enabled the development of a green-solvent UAE process that constitutes an effective post-harvest by-products strategy to minimize losses and increase biomass utilization through the recovery of bioactive compounds from BLs, promoting sustainability in the agri-food chain. © 2020 Society of Chemical Industry.

Comparison of batch and circulating processes for polyphenols extraction from pomelo peels by liquid-phase pulsed discharge.

The study was an attempt to compare batch and circulating processes for polyphenols extraction from pomelo peels by liquid-phase pulsed discharge (LPD) in order to assess the extraction efficiency of the two processes. Response surface methodology was used to optimize batch (8-12 kV discharge voltage, 30-50 mL/g liquid to solid ratio and 2-4 min extraction time) and circulating (8-12 kV discharge voltage, 30-50 mL/g liquid to solid ratio and 20-40 mL/min flow rate) extractions. The highest polyphenols yield was 2.50 ± 0.02% at 42.2 mL/g, 12 kV and 4 min in batch extraction, while circulating extraction produced the most polyphenols (2.42 ± 0.01%) at 43.7 mL/g, 10.4 kV and 27.6 mL/min. The results showed that batch extraction achieved much greater yields than circulating extraction with lower-cost equipment. Therefore, batch extraction was a promising technology for the separation of high value-added products from pharmaceuticals and fine chemicals.

Egg white lysozyme purification by a stirred cell contactor equipped with a weak ion-exchange nanofiber membrane: Process development and scale-up.

A weak ion-exchange membrane (P-COOH) was synthesized by alkaline hydrolysis of a polyacrylonitrile nanofiber membrane prepared by electrospinning process. The P-COOH membrane was characterized for its physical properties and its application for purification of lysozyme from chicken egg white was investigated. The lysozyme adsorption efficiency of the P-COOH membrane operating in a stirred cell contactor (Millipore, Model 8010) was evaluated. The effects of key parameters such as the feed concentration, the rotating speed, the flow rate of feed and the operating pressure were studied. The results showed successful purification of lysozyme with a high recovery yield of 98% and a purification factor of 63 in a single step. The purification strategy was scaled-up to the higher feedstock loading volume of 32.7 and 70 mL using stirred cell contactors of Model 8050 and 8200, respectively. The scale-up processes achieved similar purification results, proving linear scalability of the purification technique adopted.

Inulin from Pachyrhizus erosus root and its production intensification using evolutionary algorithm approach and response surface methodology.

Production of inulin from yam bean tubers by ultrasonic assisted extraction (UAE) was optimized by using response surface methodology (RSM) and genetic algorithms (GA). Yield of inulin was obtained between 11.97%-12.15% for UAE and 11.21%-11.38% for microwave assisted extraction (MAE) using both the methodologies, significantly higher than conventional method (9.9 %) using optimized conditions. Under such optimized condition, SEM image of root tissues before and extraction showed disruption and microfractures over surface. UAE provided a shade better purity of extracted inulin than other two techniques. Degree of polymerization in inulin was also recorded to be better, might be due lesser degradation during extraction. Significant prebiotic activity was recorded while evaluation using Lactobacillus fermentum and it was 36 % more than glucose treatment. Energy density by UAE was few fold lesser than MAE. Carbon emission was far more less in both these methods than the conventional one.

Environmentally Friendly Methods for Flavonoid Extraction from Plant Material: Impact of Their Operating Conditions on Yield and Antioxidant Properties.

The flavonoids are compounds synthesized by plants, and they have properties such as antioxidant, anticancer, anti-inflammatory, and antibacterial, among others. One of the most important bioactive properties of flavonoids is their antioxidant effect. Synthetic antioxidants have side toxic effects whilst natural antioxidants, such as flavonoids from natural sources, have relatively low toxicity. Therefore, it is important to incorporate flavonoids derived from natural sources in several products such as foods, cosmetics, and drugs. For this reason, there is currently a need to extract flavonoids from plant resources. In this review are described the most important parameters involved in the extraction of flavonoids by unconventional methods such as ultrasound, pressurized liquid extraction, mechanochemical, high hydrostatic pressure, supercritical fluid, negative pressure cavitation, intensification of vaporization by decompression to the vacuum, microwave, infrared, pulsed electric field, high-voltage electrical discharges, and enzyme-assisted extraction. There are no unified operation conditions to achieve high yields and purity. Notwithstanding, progress has been achieved in the development of more advanced and environmentally friendly methods of extraction. Although in literature are found important advances, a complete understanding of the extraction process in each of the unconventional techniques is needed to determine the thermodynamic and kinetic mechanisms that govern each of the techniques.

Advances in point-of-care nucleic acid extraction technologies for rapid diagnosis of human and plant diseases.

Global health and food security constantly face the challenge of emerging human and plant diseases caused by bacteria, viruses, fungi, and other pathogens. Disease outbreaks such as SARS, MERS, Swine Flu, Ebola, and COVID-19 (on-going) have caused suffering, death, and economic losses worldwide. To prevent the spread of disease and protect human populations, rapid point-of-care (POC) molecular diagnosis of human and plant diseases play an increasingly crucial role. Nucleic acid-based molecular diagnosis reveals valuable information at the genomic level about the identity of the disease-causing pathogens and their pathogenesis, which help researchers, healthcare professionals, and patients to detect the presence of pathogens, track the spread of disease, and guide treatment more efficiently. A typical nucleic acid-based diagnostic test consists of three major steps: nucleic acid extraction, amplification, and amplicon detection. Among these steps, nucleic acid extraction is the first step of sample preparation, which remains one of the main challenges when converting laboratory molecular assays into POC tests. Sample preparation from human and plant specimens is a time-consuming and multi-step process, which requires well-equipped laboratories and skilled lab personnel. To perform rapid molecular diagnosis in resource-limited settings, simpler and instrument-free nucleic acid extraction techniques are required to improve the speed of field detection with minimal human intervention. This review summarizes the recent advances in POC nucleic acid extraction technologies. In particular, this review focuses on novel devices or methods that have demonstrated applicability and robustness for the isolation of high-quality nucleic acid from complex raw samples, such as human blood, saliva, sputum, nasal swabs, urine, and plant tissues. The integration of these rapid nucleic acid preparation methods with miniaturized assay and sensor technologies would pave the road for the "sample-in-result-out" diagnosis of human and plant diseases, especially in remote or resource-limited settings.

Influence of different extraction techniques on recovery, purity, antioxidant activities, and microstructure of flaxseed gum.

Four extraction techniques (that is, hot water extraction [HWE], alkaline-acidic extraction [AAE], ultrasound assisted extraction [UAE], and microwave assisted extraction [MAE]) were compared for flaxseed gum extraction and their influence on the yield, purity, structural characterization (monosaccharide composition, molecular weight distribution, and microstructure by transmission electron microscope), and antioxidant activity (in terms of scavenging ability of 2,2-diphenyl-1-picrylhydrazyl [DPPH], 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid [ABTS], and reducing power) was investigated. The HWE achieved higher yield (8.96%) than UAE (7.84%) followed by MAE (7.01%) and AAE (6.44%). Moreover, the four flaxseed gum (FSG) samples exhibited the identical monosaccharide composition, but slight difference was observed in the content, whereas the molecular weight ratios exhibited significant difference. All samples displayed concentration-dependent manner for all antioxidant assays. UAE-FSG showed significant higher scavenging ability on DPPH free radical, ABTS free radical, reducing power, and ß-carotene bleaching assay followed by HWE-FSG, MAE-FSG, and AAE-FSG. Overall results showed that UAE was favorable to the purity of FSG, whereas HWE was more advantageous to improve the extraction yield and facile as it requires no special equipment. PRACTICAL APPLICATION: Extraction methods directly affect the recovery and purity of the extracted compound. Thus, this study could help in selection of appropriate extraction method for FSG. The results suggested that FSG possesses potential healthcare application in food industry because of their nutrition composition and antioxidant activities, and thus, it can be used for formulation of functional food as a natural antioxidant agent.

Microemulsions as nano-reactors for the solubilization, separation, purification and encapsulation of bioactive compounds.

Bioactive components possess various functionalities and are most interested for different food, nutraceutical and pharmaceutical formulations. The current review will discuss the preparation methods and fabrication techniques to design microemulsions (MEs) for the solubilization, separation, encapsulation and purification of various agro-food bioactive compounds. ME systems have shown suitable potential in enhancing oil recovery, protein extraction, and isolation of bioactive compounds. Moreover, the capability of ME based systems as drug and nutraceutical delivery cargos, and synthesis of various organic and inorganic nanoparticles, especially using biopolymers, will be investigated. ME liquid membranes are also developed as nano-extractor/nano-reactor vehicles, capable of simultaneous extraction, encapsulation or even synthesis of hydrophilic and lipophilic bioactive compounds for food, nutraceutical and drug applications.

Quantitative Analysis of Protein Self-Association by Sedimentation Velocity.

Sedimentation velocity analytical ultracentrifugation is a powerful classical method to study protein self-association processes in solution based on the size-dependent macromolecular migration in the centrifugal field. This technique can elucidate the assembly scheme, measure affinities ranging from picomolar to millimolar Kd , and in favorable cases provide information on oligomer lifetimes and hydrodynamic shape. The present step-by-step protocols detail the essential steps of instrument calibration, experimental setup, and data analysis. Using a widely available commercial protein as a model system, the protocols invite replication and comparison with our results. A commentary discusses principles for modifications in the protocols that may be necessary to optimize application of sedimentation velocity analysis to other self-associating proteins. ©2020 Wiley Periodicals LLC. Basic Protocol 1: Measurement of external calibration factors Basic Protocol 2: Sedimentation velocity experiment for protein self-association Basic Protocol 3: Sedimentation coefficient distribution analysis in SEDFIT and isotherm analysis in SEDPHAT.